Properties
– High adhesion to the foam and extruded polystyrene foam – 0.8 mPa.
– Not hydroscopic Film formed after drying does not pass moisture.
– High elasticity. Due to properly selected high-quality acrylic binder and additives, the composition does not crack during linear expansion (temperature fluctuations), shrinkage of the building and other external factors.
– Adjusted formula for Merolith coating.
– Clean surface after the first coat. После нанесения покрытия распылителем вы получаете поверхность без кратеров, разрывов, пузырьков воздуха. Наносить необходимо аккуратным равномерным слоем в 0,5–1мм 2–3 раза.
– Weather resistance. The content of Merolith compositions, binders, additives, filler make the coating resistant to ultraviolet rays, moisture, low and high temperatures, carbonization, mold…
– Manufacturer’s guarantee for 15 years subject to compliance with the “manual for use” and the use of Merolith mounting materials.
Operational characteristics
– Working temperature with a mixture from +15ºС to +30ºС.
– Drying temperature of parts from +15ºС to +30ºС.
– The density of the coating is 1.4 g / ml.
– Storage temperature from 5ºС to 30ºС. Shelf life 7 months.
– Resistance to cycles “freezing / thawing” – 320 cycles.
– Resistance to temperatures after drying from -40ºС to +60ºС
– Flammability group – G1
– It is made according to DSTU B В.2.7-233:2010
Certificate
№ 12.2-18-1 / 16134 from 20.07.2020
